Products & Services

ABCDEFGHIJKLMNOPQRSTUVWY

A

A BracketsDesign and manufacture of all marine hull brackets cast in Nickel Aluminium Bronze
Abrasion Resistant CoatingsCoating of metal components for hardness or abrasion resistance including stellite coating and hard facing.
ActuatorsSupply, overhaul and test of most brands of actuators
AgitatorsDynamic Balancing and repairs to all agitators up to 28 tonnes in weight
MachiningMachining manufacture and computerised measuring of components
AlignmentsAlignments of couplings and shafts
AluminiumCasting up to 1.5 tonnes in weight Machining, fabrication and TIG/MIG welding of all Aluminium
Aluminium BronzeCasting up to 15 tonnes in weight Machining and welding of all Aluminium Bronzes
Nickel Aluminium BronzeCasting up to 15 tonnes in weight Machining and welding of all Nickel Aluminium Bronzes
ArmaturesSkimming of commutators and Dynamic Balancing up to 28 tonnes
Artwork CastingCasting of alloys for sculpture, statues or other art
AugersRefurbishment or manufacture of Augers including balancing.
AutoclavesOn or off site refurbishment and manufacture of spares
Automatic WeldingBuilding up of worn components and pipe welding by MIG, TIG and Hot Wire
Axial FansRepair, reblade, hard facing and Dynamic Balancing of all axial fans up to 28 tonnes
AxlesStraightening of all car and truck axles. Shortening of Semi trailer and lazy axles

B

Balancing Dynamic and StaticNATA accredited - In house or On site 100g to 28 tonnes, to 3.8 m diam., to 12m long
Ball GrindingWelding up and regrinding of balls from ball valves up to 400 mm
Ball MillsOn site or off site overhaul of ball mills
Ball ValvesSupply, overhaul, testing and manufacture of spares Agent for Flowserve UK (Defence products)
BarHollow bar of castable alloys. Centricast to size requirements
BearingsManufacture of cast Bronze bearings, cast and machined up to 3.8m diameter and 28 tonnes in weight
BeatersDynamic balancing and repair of all beaters
BilletsCast billets of castable alloys
Blower RotorsRotors for blowers or other fans. Manufacture, repair or balancing
BlowersReconditioning and Dynamic Balancing of all types of blowers
Boat PropellersSelection, design and manufacture of boat propellers. High speed applications are a specialty. Balancing and repitching or marine propellers.
Boat RepairsRepair and manufacture of propellers, shafts, couplings and all underwater brackets
Boiler Feed PumpsOverhaul, repair, component manufacture (including non ferrous impellers) dynamic balancing and testing of all types of boiler feed pumps.
Boring HorizontalHorizontal Machining up to 3.7m in length and 1.5m Diameter up to 25 tonnes in weight
Bow thrust PropellersSelection, design and manufacture of boat propellers.
BracketsMarine shaft brackets or structural engineering brackets
Brake DrumsDynamic Balancing of all brake drums both industrial and automotive
Brazing InductionInduction brazing for adhesion of metel or non metal materials
BronzeBronze castings up to 15 tonnes including machining. Bushes and bearings
Burner TubesCast hollow buner tubes to customer alloy specifications.
BusbarsFabrication of aluminium substation fittings.
BushesBronze bushes and bearings cast and machined up to 15 tonnes

C

CAD/CAMFull CAD/CAM design facilities
CNC Machining / Pattern MakingComputerised Numerical Machining by milling (3750 mm x 1500 mm x1500 mm), turning (2000 diameter x 1000 mm) and measuring (650 mm x 1000 mm x 650 mm)
CalibrationCalibration services available up to 1m in length. Referenced to Australian Standards. Includes thread and taper calibration
Cardan Shafts/JointsManufacture, repair and dynamic balancing of all Cardan shafts, Spicer, Twin Disc, GWB, Voith and Mechanics for Caterpillar, Komatsu and all popular makes
CastingsAll non ferrous castings in copper and aluminium alloys. Capacity up to 15 tonnes, with shell moulding facilities available
Centrifugal CastingsCentrifugally Cast Hollow pipe in Bronze, Stainless Steels, Nickel Alloys and Cobalt Alloys. Cast size range from 75mm OD to 410mm OD in lengths of 2100mm.
Centrifugal PumpsManufacture of spares, Dynamic Balancing and complete overhaul of Centrifugal Pumps
CentrifugesOverhaul of all types of centrifuges, manufacture of spares and dynamic balancing of rotors
Chemical AnalysisNATA chemical analysis of ferrous and non ferrous metals using AES method
Chlorine CompressorsManufacture of spares, Dynamic Balancing and complete overhaul of Chlorine compressors
CladdingStainless Steel and Incalloy cladding of Steel components using MIG or Hot Wire TIG
ClavesOn site overhaul and component reconditioning for all Auto and Leach Claves
Cobalt AlloysSand Casting and Cetricast of Cobalt alloys.
Combustion LinersCentricast combustion liners.
CompressorsReconditioning and Dynamic Balancing of all types of reciprocating, screw, axial and centrifugal compressors
Computer ModellingUsing 3D modeling facilities Auto Cad, UG and Solid Works
ConrodsDynamic Balancing and straightness checking of all conrods
Cooling TowersRemoval, repair, re-installation and balancing of cooling tower motor, gearboxes and fans
Coordinate MeasuringFor items up to 1m in length using a fully computerised Coordinate Measuring Machine (CMM) with statistical capability Referenced to Australian Standards.
Corrosion ProtectionAutocatalytic Electroless Nickel Phosphorous plating of steels and stainless steels up to 2.5m long by 1m by 1m in section
CouplingsRepair, re-alignment, Dynamic Balancing in house or on site
Crack DetectionNATA approved Dye Penetrant, Magnetic Particle and Ultrasonic crack detection
CrankshaftsNATA approved Dynamic Balancing of crankshafts up to 28 tonnes in weight
Crusher BushesCasting and machining of all crusher bushes and bearings up to 5 tonnes in weight
Crusher PartsCasting and Machining of crusher wear parts and bushes
Cylindrical GrindingCylindrical grinding up to 1.7m in length and 330 mm in diameter

D

Design ServicesDesign of propulsion systems including propellers, shafts, brackets, rudders and couplings
Die CastingDie casting of Aluminium components.
DiesDie machining using 5 Axis CNC machining
Differential CarriersRe-sleeving of bearing areas
Differential HousingsStraightening of automotive differential housings Replacement of differential quills on truck differentials
DriveshaftsRepair, manufacture and Dynamic Balancing of all automotive, earthmoving, marine and truck driveshafts and PTO shafts
Dye Penetrant Crack DetectionNATA approved Dye Penetrant crack detection

E

Earthmoving Tailshafts and DriveshaftsRepair, manufacture and Dynamic Balancing of all automotive, earthmoving, marine and truck driveshafts
Electric MotorsReconditioning, skimming of commutators and Dynamic Balancing of all electric motors up to 28 tonnes
Electroless Nickel PlatingAutocatalytic Electroless Nickel Phosphorous plating of steels, stainless steels and copper based alloys up to 2.5m long by 1m by 1m in section
EnginesDynamic Balancing of all engine components for all engines of any size up to 28 tonnes
Exotic MetalsManufacture of components from a wide range of exotic metals as requested

F

FabricationFabrication up to 25 tonnes in steel and 15 tonnes in aluminium using MIG and TIG
FansRepair, reblade, hard facing and Dynamic Balancing of all fans up to 28 tonnes
FittingOn site and in house fitting capability for shutdowns, dockings and all maintenance periods
FlangesManufacture, welding, alignment and installation of all types of flanges
Flexible CouplingsOverhaul, installation and Dynamic Balancing of all types of flexible couplings
Fluid CouplingsOverhaul, installation and Dynamic Balancing of all types of fluid couplings
Fluid DrivesRefurbishment of fluid drives.
FoundingNon Ferrous founding up to 15 tonnes for Aluminium and Bronzes with pattern making facilities

G

Gas CompressorsManufacture of spares, Dynamic Balancing and complete overhaul of Gas compressors
Gate ValvesSupply, overhaul, testing and manufacture of spares
GaugingFor items up to 1 M in length using a fully computerised Coordinate Measuring Machine (CMM) with statistical capability. Referenced back to Australian Standards.
Gear CuttingManufacture of gear blanks and cutting of straight cut gears and splines.
Gearbox CasingsRepair of bearing areas and welding of cracks, line boring of gearbox casing bearing areas
GearboxesOverhaul, installation and spares manufacturing for industrial gearboxes and reduction boxes
Glass Bead BlastingPrecision blasting 800 mm x 600 mm x 600 mm
GrindingCylindrical (1700 mm x 330 mm diameter) Surface (1540 mm x510 mm x 470 mm) Rotary (750 mm diameter x 200 mm high)
GunmetalPattern making and casting Capacity up to 15 tonnes, with shell moulding facilities available
ClasificationManufacturing Under Classification Societies eg. LR, DNV, ABS, BV, GL, IRS, RINA etc.
GyroscopesDynamic Balancing with NATA accreditation

H

Hammer MillsRepair, installation and Dynamic Balancing (NATA)
Hard FacingWelding and metal spraying of a range of hard facing materials
Hardness TestingDiamond and Steel ball hardness testing - Rockwell, Brinnel, Vickers etc. (NATA)
Harmonic Balancer TestingTesting of harmonic balancers at operating temperatures to ensure self damping
Hollow BarCentrifugally Cast Hollow pipe in Bronze, Stainless Steels, Nickel Alloys and Cobalt Alloys. Cast size range from 75mm OD to 410mm OD in lengths of 2100mm.
Horizontal BoringHorizontal Machining up to 3.7m in length and 1.5m Diameter up to 25 tonnes in weight
HydraulicsRepairs to hydraulic equipment and overhaul of systems inhouse and on-site
Hydrostatic TestingHydrostatic testing of pressurised components.

I

I-BracketsDesign and manufacture of marine I-Brackets
ImpellersGrinding and Dynamic Balancing(NATA) of all types of impellers Casting of stainless steel and bronze impellers
In Situ BalancingDynamic balancing of all accessible rotating equipment on site
Induction BrazingInduction brazing for bonding of metal and non metal items.
Industrial MaintenanceFrom turn key refurbishment to installation of machinery both in house and on site Pumps, turbines, compressors, crushers, actuators, multi stage pumps, fans, blowers, gearboxes, mechanical seals, cooling towers, valves, ball mills and conveyor systems
InspectionVerification of manufacturing tolerances and conformance to required standards using a CMM and measuring equipment calibrated to Australian Standards

J

Jig BoringSeveral Jig borers available. Capacity to 1.5m x 3m.
Jobbing MachiningMachining of the smallest to the largest, no job is too hard, small or difficult Turning, milling, grinding, boring and slotting

K

KeysManufacture of all parallel and tapered keys from all materials
KeywaysMilling, slotting and keyseating of all parallel and tapered keys Keyways cut up to 450 mm in length

L

Labour HireHire out of staff with specialised skills on an hourly rate basis
LappingAutomatic lapping of seal faces and valves up to 500 mm
LathesReconditioning of Lathes
Leaded BronzePattern making and casting Capacity up to 5 tonnes, with shell moulding facilities available
Line BoringHorizontal Machining up to 3.7m in length and 1.5m Diameter up to 25 tonnes in weight
Liquid Penetrant TestingNATA approved Dye Penetrant crack detection
Locomotive CrankshaftsDynamic Balancing of locomotive crankshafts
Locomotive Radiator/Traction Motor BlowersOverhaul, repair and Dynamic Balancing of traction motor blowers

M

Mechanical testingNATA mechanical analysis of ferrous and non ferrous metals
MIG WeldingFor Aluminium, Stainless steel and steels
MachiningMachining of the smallest to the largest, no job is too hard, small or difficult. Turning, milling, grinding, boring and slotting.
Magnetic Particle Inspection MPIMagnetic Particle Inspection for crack detection (NATA)
Maintenance ServicesOn-site maintenance and maintenance management services for mechanical equipment
Marine DriveshaftsRepair, manufacture and Dynamic Balancing of all automotive, earthmoving, marine and truck driveshafts
Marine ProductsDesign and manufacture of propulsion systems including propellers, shafts, brackets, rudders, stocks, stern tubes and couplings
Marine PropellersDesign and manufacture of marine propellers, both standard product range and custom designs.
Marine RefittingComplete overhaul of marine equipment systems including valve, propulsion, hydraulic, steam, air and all mechanical systems
Mechanical FittingFrom turn key refurbishment to installation of machinery both in house and on site Pumps, turbines, compressors, crushers, actuators, multi stage pumps, fans, blowers, gearboxes, mechanical seals, cooling towers, valves, ball mills and conveyor systems
Mechanical SealsOverhaul and lapping of all mechanical seals
Mechanical SurveysVerification of dimensions and conformance to required standards using a CMM and measuring equipment calibrated to Australian Standards
Metal SprayingBuild up and hard facing using fusion metal spray process
MetallurgyAnalysis of Co, Ni, stainless steel, steel, bronze and aluminium alloys. NATA certification of chemical analysis using an AES spectrometer.
MetrologyMeasuring and calibration services available up to 1m in length. Referenced to Australian Standards. Includes thread and taper calibration For items up to 1m in length using a fully computerised Co-ordinate Measuring Machine (CMM) with statistical capability. Referenced to Australian Standards.
MillingMilling of the smallest to the largest, no job is too hard, small or difficult Milling up to 3750mm by 1500mm by 1500mm up to 25 tonnes in weight
ModellingUsing 3D modelling facilities
MouldsMould machining using CNC machining
Multi Stage PumpsOverhaul, repair, component manufacture (including non ferrous impellers), Dynamic Balancing and testing of all types of multi-stage pumps

N

NATA ServicesDynamic Balancing - to 28 Tonnes, Visual inspection, Liquid penetrant testing, Magnetic Particle testing, Chemical and Mechanical analysis of metals
Nickel AlloysNickel alloys in sand cast or centricast process.
Nickel Aluminium BronzePattern making and casting Capacity up to 15 tonnes, with shell moulding facilities available
Nickel PlatingAutocatalytic Electroless Nickel Phosphorous plating of steels and stainless steels up to 2.5m long by 1m by 1m in section
Non Destructive TestingVisual inspection, Liquid penetrant testing, Magnetic Particle testing, Ultrasonic Inspection, Chemical and Mechanical analysis of metals
Non Ferrous CastingsPattern making and casting Capacity up to 15 tonnes, with shell moulding facilities available
Nozzle PropellersDesign and manufacture of nozzle propellers, both standard product range and custom designs.

O

On Site BalancingDynamic balancing of all accessible rotating equipment on site
On Site WorkFrom turn key refurbishment to installation of machinery both in house and on site Pumps, turbines, compressors, crushers, actuators, multi stage pumps, fans, blowers, gearboxes, mechanical seals, cooling towers, valves, refits
On site Hardness TestingPortable hardness testing for on site tests.
On site NDTFluro and visual liquid penetrant. Mag-particle and thickness testing.
OverhaulingFrom turn key refurbishment to installation of machinery both in house and on site Pumps, turbines, compressors, crushers, actuators, multi stage pumps, fans, blowers, gearboxes, mechanical seals, cooling towers, valves, refits
Oxy Feed PumpsOverhaul, repair, component manufacture (including non ferrous impellers), Dynamic Balancing and testing of all types of oxy feed pumps

P

P-BracketsDesign and manufacture of marine P Brackets
Paddle FansManufacture, repair, reblade, hard facing and Dynamic Balancing of all paddle fans up to 5 tonnes
Pattern MakingIn house pattern making facilities for castings Computer generated patterns available
Penetrant TestingFluro and colour contrast penetrant.
Pipe FlangesManufacture, welding, alignment and installation of all types of flanges
PistonsBalancing of all engine pistons
Pressure TestingPressure testing of valves and all liquid vessels up to 40,000 kPa
Project ManagementProject management skills in the professional areas of Mechanical and Electronic Engineering and Naval Architecture to manage all company services offered
Propeller NutsManufacture and design of propeller nuts
Propeller DesignProfessional propeller design services available
Propeller RepairsMarine propeller repairs to suit commercial and pleasure type boats
Propeller ShaftingMachining and straightening of propeller shafting
PropellersManufacture and repair of all marine propellers up to 5 tonnes in weight Manufactured to all international classes including class S
Propulsion SystemsDesign and manufacture of propulsion systems including propellers, shafts, brackets, rudders and couplings
PulleysManufacture and repair of all types of pulleys up to 3.8m diameter Dynamic Balancing of pulleys up to 28 tonnes
PumpsOverhaul, repair, component manufacture (including non ferrous impellers), Dynamic Balancing and testing of all types of pumps

Q

QuillsManufacture and installation of truck and earthmoving differential quills

R

Radial FansRepair, reblade, hard facing and Dynamic Balancing of all centrifugal fans up to 28 tonnes
Radial GrindingRadial (750 mm diameter x 200 mm high)
Radiant TubesCentricast hollow bar for radiant tube applications. Proofing, final machining and welding all available.
Radiator FansRepair, straightening and re-blading of all radiator fans Converting to rock ejector type
ReamingReaming of all holes and bores
Reciprocating PumpsOverhaul, repair, component manufacture, Dynamic Balancing and testing of all types of reciprocating pumps
ReconditioningFrom turn key refurbishment to installation of machinery both in house and on site Pumps, turbines, compressors, crushers, actuators, multi stage pumps, fans, blowers, gearboxes, mechanical seals, cooling towers, valves, refits
Reduction BoxesOverhaul, installation and spares manufacturing for industrial gearboxes and reduction boxes
RefitsComplete overhaul of marine equipment systems including valve, propulsion, hydraulic, steam, air and all mechanical systems
Refurbish TailshaftsRefurbishment of tailshafts for all applications.
Remotely Operated VehiclesSpecialist manufacture and repair of ROVs
Rock Ejector FansConversion of radiator fans to have rock ejector blades including hard facing of blades
RollersManufacture and repair of all types of pulleys up to 3.8m diameter Dynamic Balancing of pulleys up to 28 tonnes
Roots Type BlowersReconditioning and Dynamic Balancing of all types of blowers
Rotary ValvesSupply, overhaul, testing and manufacture of spares
Rotating EquipmentOverhaul, repair, component manufacture (including non ferrous impellers), Dynamic Balancing and testing of all types of rotating equipment in house and on site
RuddersDesign and manufacture of marine rudders

S

Screw CuttingScrew cutting of trapezoidal, Acme, UN, Whitworth, BSP, NPT, AN Metric and tapered threads both internal and external
Screw Type CompressorsReconditioning and Dynamic Balancing of all types of screw compressors
SealsOverhaul and lapping of all types of mechanical seals
SeatsBuild up, recutting and pressure testing of valve seats
SeparatorsOverhaul of all types of separators, manufacture of spares and dynamic balancing of rotors
ShaftingMachining of shafting up to 150mm diameter and 6m in length Machining of other shafts to 1.7m diameter and 4m in length
Shell MouldingFor batch production of non ferrous castings
Silicon BronzeCasting of Silicon Bronze up to 15 tonnes
Site WorkFrom turn key refurbishment to installation of machinery both in house and on site Pumps, turbines, compressors, crushers, actuators, multi stage pumps, fans, blowers, gearboxes, mechanical seals, cooling towers, valves, ball mills and conveyor systems
SleevesManufacture of sleeves for wear components, shaft repair or locational applications. Centricast hollow bar or sand casting available in alloys as required.
SlottingSlotting of all parallel and tapered keyways and splines Keyways and splines cut to 450 mm long
SocketsCasting and machining of crusher sockets up to 15 tonnes in weight
Specialised AlloysSpecialised alloys cast in hollow bar or sand cast.
Spectro-analysisNATA chemical analysis of ferrous and non ferrous metals
SpindlesRepair and replacement of ends of dump truck spindles including splining
SplinesRe-machining and recutting of splines internal and external up to 450 mm long
Stainless SteelMachining and Welding of all grades of Stainless Steel Manufacture of Stainless Steel propeller shafting Casting up to 1 tonne of Stainless Steel
Statistical AnalysisAutomatic statistical analysis of product dimensions using a programmable coordinate measuring machine
SteelMachining, welding, grinding and metal spraying of all grades of steel
Stellite CoatingStellite coating and hard facing for wear components.
Stellite WeldingStellite welding of small surfaces for valves and wear plates
Submersible PumpsRebuild and repair of submersible pumps for mining, processing and dewatering applications.
Surface GrindingSurface grinding sizes to 1540 mm x 510 mm x 470 mm

T

TIG WeldingFor Aluminium, Stainless steel and steels including Rod and Hot Wire TIG
TailshaftsRepair, manufacture and Dynamic Balancing of all automotive, earthmoving, marine and truck tailshafts and PTO shafts
ThreadsMachining and precision measuring of all types of threads
ThreshersRepair and Dynamic Balancing of threshers up to 28 tonnes
TitaniumSupply, machining and welding of Titanium
Toggle PinsCasting and machining of toggle pins up to 15 tonnes in weight
Torque ConvertersComplete overhaul and Dynamic Balancing of all torque converters
Traction MotorsOverhaul, repair and Dynamic Balancing of traction motor blowers Skimming of commutators and balancing of rotors
Truck Drive ShaftsManufacture, repair and dynamic balancing of all truck drive shafts, Spicer, Rockwell, Twin Disc, GWB, Voith, Mechanics to suit all brands of trucks including all Japanese makes
TungstenTungsten fusion metal spray for hard facing purposes
Tungsten CoatingTungsten coating of wear components.
TurbinesOverhaul, re-blading, grinding and Dynamic Balancing of all gas and steam turbines to 28 tonne rotor mass.
Turbo CompressorsOverhaul, manufacture of spares and Dynamic Balancing of turbo compressors
TurningTurning up to 2.3m diameter and 5m in length CNC turning up to 1.8m

U

Ultrasonic InspectionUltrasonic inspection of metals for crack detection or sub-surface indication detection
UmCo50Centricast and sand cast products from UmCo50 and other high wear resistance alloys.
Universal JointsSupply and fitment of all earthmoving, marine, automotive and truck universal joints

V

V-BracketsDesign and manufacture of marine V-Brackets
Valve ActuatorsSupply, overhaul and test of most brands of actuators
ValvesSupply, overhaul and test of most brands of valves Manufacture of non ferrous high pressure submarine valves Reclaiming of balls Manufacture of seats
VerificationVerification of dimensions up to 1m in length using a fully computerised Coordinate Measuring Machine (CMM) with statistical capability Referenced back to Australian Standards Verification of manufacturing tolerances and conformance to required standards
Viscous DamperTesting of viscous dampers at operating temperatures to ensure self damping.

W

Warman PumpsDynamic Balancing, overhaul and repair of all Warman Pump impellers
Water pumpsOverhaul, repair, component manufacture (including non ferrous impellers), Dynamic Balancing and testing of all types of pumps
Wear LinersWear liners cast and final machined for procesing and milling plants.
Wear PlatesManufacture and fitment of wear plates to fans and industrial equipment
Wear Resistant CoatingsAutocatalytic Electroless Nickel Phosphorous plating of steels and stainless steels up to 2.5m long by 1m by 1m in section
WeldingMIG and TIG and Hot Wire.

Y

Y-BracketsDesign and manufacture of marine Y-Brackets
YokesReplacement of yokes on truck drive shafts, Spicer, Rockwell, Twin Disc, GWB, Voith, Mechanics to suit all brands of trucks including all Japanese makes